Spectrum Analyzer for Visualization
|Product Feature||Customer Benefit|
|Noise floor as low as -161 dBm||View lower powered signals (harmonics, interference sources) and ease trouble-shooting.|
|Displayed Average Noise Level determines the lowest power level an analyzer can resolve. It is effected by settings including PreAmplifiers, Attenuation, and RBW. On the DSA800 Series, Typical Normalized DANL is as low as -161 dBm with the standard preamp activated on the 3.2 and 7.5 GHz models.|
|EMI PreCompliance measurements (option)||Use FCC bandwidths, EMI filter, and QuasiPeak Detector to make PreCompliance measurements during the design process saving time and money getting new products to market.|
|The Rigol DSA series of spectrum analyzers are ideal for performing near-field probing, conducted, and emitted precompliance measurements.
Add the S1210 PreCompliance software, Near Field Probes (NFP-3), and the EMI-DSA800 option to make complete EMI PreCompliance measurements with the DSA800 Series analyzers.
|Down to 10Hz Minimum Resolution Bandwidth (RBW)||Provides high resolution to separate signals with similar frequencies enabling easier signal identification|
|Resolution Bandwidth sets the distance between measurements in frequency. This is important, for instance, when you need to differentiate between 2 carriers that are only 50 Hz apart. They can't be viewed as distinct signals with a RBW setting as large as the separation.
|Tracking Generator and VSWR options measurement options||Low cost additions provide the ability to test cables, antennas, filters, and active components. VSWR option automates standing wave parameter measurements.|
|Having an integrated RF source that is synchronized with the spectrum analyzer to test frequency response of components is an important feature for a spectrum analyzer. Analyzers refer to the source as a tracking generator. A signal source that generates a carrier that tracks with the analyzer's measurements.
Tracking Generators are included on the models ending in "-TG". They can not be added later. The DSA800-VSWR measurement feature is a software option than can be added at any time to automate reflectivity measurements.
|Model||Frequency||DANL||Phase Noise||RBW||Price (USD)|
|DSA815||1.5 GHz||-155 dBm||-80 dBc/Hz||10 Hz||$1,295||Find a Distributor|
|DSA815-TG||1.5 GHz||-155 dBm||-80 dBc/Hz||10 Hz||$1,403||Find a Distributor|
|DSA832E||3.2 GHz||-158 dBm||-90 dBc/Hz||10 Hz||$2,159||Find a Distributor|
|DSA832E-TG||3.2 GHz||-158 dBm||-90 dBc/Hz||10 Hz||$2,807||Find a Distributor|
|DSA832||3.2 GHz||-161 dBm||-98 dBc/Hz||10 Hz||$3,671||Find a Distributor|
|DSA832-TG||3.2 GHz||-161 dBm||-98 dBc/Hz||10 Hz||$4,751||Find a Distributor|
|DSA875||7.5 GHz||-161 dBm||-98 dBc/Hz||10 Hz||$6,479||Find a Distributor|
|DSA875-TG||7.5 GHz||-161 dBm||-98 dBc/Hz||10 Hz||$7,559||Find a Distributor|
To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments
For help writing your own programs for our instruments review the programming manual or contact us directly.