Accessories

ADP0150BNC
ADP0150BNC
50 Ohm impedance adapter for oscilloscopes or generators
$18
AFK-DP800
AFK-DP800
Detect and Analyzer option for DP800 Family
$102
AMK-DSA1000
AMK-DSA1000
Spectrum Analyzer Measurement Package Option
$660
AMK-DSA800
AMK-DSA800
Advanced Measurement Kit
$549
Arb16M-DG1000Z
Arb16M-DG1000Z
16M Arb memory Depth Option for the DG1000Z series generators
$171
AT-DS1000Z
AT-DS1000Z
Advanced trigger option for DS1000Z
$191
ATT03301H
ATT03301H
30dB High Power Attenuator, Max Power 100W
$230
BAG-DS1000
BAG-DS1000
Instrument Carry Case for a DS1000 Series Oscilloscope
$55
BAG-DSA1000
BAG-DSA1000
Soft Carrying Bag for a DSA1000 Series or DSA1000A Series Spectrum Analyzer.
$165
BAG-G1
BAG-G1
Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.
$147
BND-MSO/DS2000A
BND-MSO/DS2000A
MSO/DS2000A option bundle including MEM-DS2000, AT-DS2000, SD-DS2000, CAN-DS2000. Special bundle available for a limited time. This option enables deep memory, serial decoding including CAN bus as the advanced triggering options listed in the User's Guide.
$256
BND-MSO/DS4000
BND-MSO/DS4000
Serial Bus decoding bundle for the MSO & DS4000. Includes I2C, SPI, CAN, FLEXRAY & RS-232.
$635
BW2T3-MSO/DS4000
BW2T3-MSO/DS4000
Bandwidth upgrade form 200MHz to 350MHz for MSO/DS402x
$3,234
BW2T5-MSO/DS4000
BW2T5-MSO/DS4000
Bandwidth upgrade form 200MHz to 500MHz for MSO/DS402x
$6,064
BW3T5-MSO/DS4000
BW3T5-MSO/DS4000
Bandwidth upgrade form 350MHz to 500MHz for MSO/DS403x
$2,830
CB-20A-780MM
CB-20A-780MM
Load input 20 A cable. Cable is 30 inches long.
$20
CB-40A-780MM
CB-40A-780MM
Load input 40 A cable. Cable is 30 inches long.
$30
CB-60A-780MM
CB-60A-780MM
Load input 60 A cable. Cable is 30 inches long.
$41
CB-BNC-BNC-MM-100
CB-BNC-BNC-MM-100
BNC Cable (length 1 meter)
$19
CB-NM-NM-75-L-12G
CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable
$198
CB-NM-SMAM-75-L-12G
CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable
$198
CB-SENSE
CB-SENSE
Sense Cable for DL3000 Sense inputs
$20
DG-POD-A
DG-POD-A
16 Channel Digital Signal Generator Module for DG5000 Series Arbitrary Function Generators
$880
DIGITALIO-DL3
DIGITALIO-DL3
Digital I/O Triggering Option for DL3000 Series Loads. Standard on DL3000A series instruments.
$107
DIGITALIO-DP800
DIGITALIO-DP800
Four channels for trigger in & out option for the DP800 Family
$102
DK-DS6000
DK-DS6000
Demonstration signal board for RIGOL Oscilloscopes
$220
DL-02
DL-02
Terminal Shield for covering front inputs of DL3000 Series Loads. Clear Plastic.
$20
DS1000D
DS1000D
Replacement Logic head kit for digital channel measurements. DS1000D Series models ONLY.
$308
DSA Utility Kit
DSA Utility Kit
DSA Accessories Package including cables, adaptors, and antennas.
$791
DSG800-PUG
DSG800-PUG
Pulse Train Generator option for the DSG800 Series RF signal sources. Includes DSG800-PUM license automatically.
$799
DSG800-PUM
DSG800-PUM
Pulse modulation option for the DSG800 Series RF signal sources
$599
EMI-DSA800
EMI-DSA800
EMI Filter & Quasi-Peak Detector Kit
$659
FH-DG5000
FH-DG5000
Frequency hopping software license option for DG5000 series AWG
$2,178
FREQ-DL3
FREQ-DL3
High Frequency Option for DL3000 Series Loads. Standard on DL3000A series instruments. Updates DL3000 Instruments to 30 kHz capability.
$107
HIRES-DP700
HIRES-DP700
1mV / 1 mA Resolution option for the DP700 Series power supplies
$62
HIRES-DP800
HIRES-DP800
1mV/1mA Resolution Option for DP800 Family
$102
INTERFACE-DP800
INTERFACE-DP800
RS-232 and LAN interface option for DP800 Family
$133
LAN-DL3
LAN-DL3
Ethernet Communication Option for DL3000 Series Loads. Standard on DL3000A series instruments.
$107
LD-DM
LD-DM
TEST LEAD SET FOR DMM
$33
M3A2B
M3A2B
Analog bus to banana jack cable for M300 system mainframe. For direct external connection of DM3065 DMM module to external signal.
$21
M3TB16
M3TB16
Terminal block accessory for M300 DAQ system modules with model numbers ending in 16.
$78
M3TB20
M3TB20
Terminal block accessory for M300 DAQ system modules with model numbers ending in 20.
$78
M3TB24
M3TB24
Terminal block accessory for M300 DAQ system modules with model numbers ending in 24.
$78
M3TB32
M3TB32
Terminal block accessory for M300 DAQ system modules with model numbers ending in 32.
$78
M3TB34
M3TB34
Terminal block accessory for M300 DAQ system modules with model numbers ending in 34.
$78
M3TB48
M3TB48
Terminal block accessory for M300 DAQ system modules with model numbers ending in 48.
$78
M3TB64
M3TB64
Terminal block accessory for M300 DAQ system modules with model numbers ending in 64.
$78
MC3065
MC3065
DMM Module for M300 DAQ System
$531
MC3120
MC3120
20 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB20 is the mating terminal block for this module.
$368
MC3132
MC3132
32 channel differential Multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. Configurable for 2 or 4 wire measurements. The M3TB32 is the mating terminal block for this module.
$454
MC3164
MC3164
64 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. The M3TB64 is the mating terminal block for this module.
$462
MC3324
MC3324
24 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels. The M3TB24 is the mating terminal block for this module.
$545
MC3416
MC3416
16 channel actuator module for use with M300 DAQ System Mainframe. The M3TB16 is the mating terminal block for this module.
$395
MC3534
MC3534
Multifunction module for use with M300 DAQ System Mainframe. It includes 4 DACs, 4 Totalizers, and 32 DIO bits. The M3TB34 is the mating terminal block for this module.
$606
MC3648
MC3648
Matrix module for use with M300 DAQ System Mainframe. It is a 4x8 2-wire matrix switch. The M3TB48 is the mating terminal block for this module.
$494
MEM-DS1000Z
MEM-DS1000Z
24Mpts memory depth option for 1000Z Series Oscilloscopes
$197
NFP-3
NFP-3
Near Field Probe Kit
$524
OCXO-A08
OCXO-A08
High Stable OCXO Reference Clock option for DSG3000 Signal Generators
$1,210
OCXO-B08
OCXO-B08
High stability timebase option for the DSG800 Series RF signal sources
$629
OCXO-C08
OCXO-C08
High Stability Clock option for the RSA5000 series. Improves clock aging rate from <1 ppm/year to <0.03 ppm/year.
$799
PA-DSA1030
PA-DSA1030
Preamplifier option (only for DSA1030 or DSA1030-TG)
$660
PA-DSA832
PA-DSA832
Preamplifier option, 100kHz to 3.2GHz (only for DSA832, DSA832E, DSA832E-TG, or DSA832-TG)
$629
PA-DSA875
PA-DSA875
Preamplifier option, 100kHz to 7.5GHz (only for DSA875 or DSA8375-TG)
$629
PA1011
PA1011
10W POWER AMPLIFIER FOR GENERATORS
$429
PMC-DSG3000
PMC-DSG3000
Power Meter Control option for DSG3000 Signal Generators
$535
PUG-DSG3000
PUG-DSG3000
Pulse Train Generator option for DSG3000 Signal Generators
$726
PVP2150
PVP2150
150 MHz Passive Probe with 1x:10x selector. Wide bandwidth of 35 MHz in 1x mode.
$41
PVP2350
PVP2350
300 MHz Passive Probe with 1x:10x selector. Wide bandwidth in 1x mode up to 35 MHz.
$55
RA5040K
RA5040K
40 dB attenuator accessory for oscilloscopes or generators
$44
REC-DS1000Z
REC-DS1000Z
Waveform record and play option for DS1000Z
$146
RF Adaptor Kit
RF Adaptor Kit
RF Cable and adaptor kit
$314
RF Attenuator Kit
RF Attenuator Kit
Kit Includes 6dB Attenuator (1pcs), 10dB Attenuator (2pcs)
$524
RF CATV Kit
RF CATV Kit
Kit Includes 50 to 75 Ohm Adaptors (2pcs)
$419
RM-1-DG1000Z
RM-1-DG1000Z
Rack Mounting Kit for ONE DG1000Z Series Generator. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
$74
RM-1-DP700
RM-1-DP700
Rack Mount Kit for 1 unit of DP700 power supply
$89
RM-1-DP800
RM-1-DP800
Rack Mounting Kit for 1 DP800 Series Power Supply. May be different than image. Rack kits are different for each instrument.
$129
RM-1-M300
RM-1-M300
Rack Mount for 1 M300
$267
RM-2-DG1000Z
RM-2-DG1000Z
Rack Mounting Kit for TWO DG1000Z Series Generators. May be different than image. DG1Z rack kits contain mounting ears rather than a shelf or enclosure.
$98
RM-2-DP800
RM-2-DP800
Rack Mounting Kit for 2 DP800 Series Power Supplies. May be different than image. Rack kits are different for each instrument.
$116
RM-2-M300
RM-2-M300
Rack Mount for 2 M300 Systems
$300
RM-3-DP700
RM-3-DP700
Rack Mount Kit for 3 units of DP700 power supply
$83
RM-DG
RM-DG
Rack mount kit for DG1022, DG1022A, and DM3000 family.
$165
RM-DG5000
RM-DG5000
Rack Mounting Kit for a DG5000 Series Generator. May be different than image. Rack kits are different for each instrument.
$220
RM-DS-1B
RM-DS-1B
Rack Mounting Kit for a DS1000B scopes. May be different than image. Rack kits may look different than picture
$374
RM-DS-1B
RM-DS-1B
Rack Mounting Kit for a DS1000B scopes. May be different than image. Rack kits may look different than picture.
$374
RM-DS1000Z/DG4000
RM-DS1000Z/DG4000
Rack Mounting Kit for a DS1000Z Series Oscilloscope or DG4000 Series generator. May be different than image. Rack kits are different for each instrument.
$150
RM-DS2000
RM-DS2000
Rack Mount Kit for the DS2000 and DS2000A Series Oscilloscope
$374
RM-DS4000
RM-DS4000
Rack Mounting Kit for a DS4000 or MSO4000 Series Oscilloscopes. May be different than image. Rack kits are different for each instrument.
$330
RM-DS6000
RM-DS6000
Rack Mounting Kit for DS6000 Series Oscilloscopes. May be different than image. Rack kits are different for each instrument.
$440
RM-DSA1000
RM-DSA1000
Rack Mounting Kit for a DSA1000 Series or DSA1000A Series Spectrum Analyzer. May be different than image. Rack kits are different for each instrument.
$407
RM-DSA800
RM-DSA800
Rack Mounting Kit for a DSA800 Series Spectrum Analyzer. May be different than image. Rack kits are different for each instrument.
$374
RM-DSG3000
RM-DSG3000
Rack Mount kit for DSG3000 Signal Generators. May be different than image. Rack kits are different for each instrument.
$99
RM6041
RM6041
Rack Mounting Kit for a RSA5000 Series Spectrum Analyzer
$299
RP1000P
RP1000P
RP1003C/RP1004C/RP1005C probe power supply
$1,485
RP1001C
RP1001C
Current Probe, DC-300 kHz,100 Apeak
$825
RP1002C
RP1002C
Current Probe, DC-1 MHz,70A peak
$1,705
RP1003C
RP1003C
Current Probe, DC-50 MHz,50A peak. Requires RP1000P power supply.
$3,245
RP1004C
RP1004C
Current Probe, DC-100 MHz,50 A peak. Requires RP1000P power supply.
$4,675
RP1005C
RP1005C
Current Probe, DC-10 MHz,300A peak. Requires RP1000P power supply.
$4,125
RP1010H
RP1010H
High Voltage Probe with 40MHz bandwidth, 10kV max DC voltage, 1000:1 attenuation
$499
RP1018H
RP1018H
High Voltage Probe with 150MHz bandwidth, 18kV max DC voltage, 1000:1 attenuation
$988
RP1025D
RP1025D
High Voltage Differential Probe, DC-25 MHz, 1400 Vpp
$450
RP1050D
RP1050D
High Voltage Differential Probe, DC-50 MHz, 7000 Vpp
$650
RP1100D
RP1100D
High Voltage Differential Probe, DC-100 MHz, 7000 Vpp
$750
RP1300H
RP1300H
100:1 300 MHz TO 2KV PASSIVE PROBE
$231
RP3500A
RP3500A
500 MHz Passive Probe
$220
RP5600A
RP5600A
600 MHz Bandwidth 10:1 Passive Probe Kit (these ship standard with DS6000 Series Oscilloscopes)
$435
RP6150A
RP6150A
1.5GHz Passive Probe. Probe may be different than image indicates.
$325
RP7080
RP7080
Active, differential, 800 MHz probe for DS6000 or DS/MSO4000 Series Oscilloscopes
$2,099
RP7080S
RP7080S
Active single-ended, 800 MHz probe for DS6000 pr DS/MSO4000 Series Oscilloscopes
$1,049
RP7150
RP7150
1.5 GHz Bandwidth Active Probe Kit option for DS4000 & DS6000 Series Oscilloscopes
$4,510
RP7150S
RP7150S
Active single-ended,1.5GHz probe for DS6000 pr DS/MSO4000 Series Oscilloscopes
$2,520
RPL1116
RPL1116
Standard logic probe for MSO1000Z. Upgrades a DS1000Z Plus or DS1000Z-S Plus to an equivalent MSO. Includes front panel labels with MSO model number. Only works with the Plus models or as a replacement part for the MSO1000Z models.
$308
RPL2316
RPL2316
Logic Probe for MSO2000A and MSO4000 Series Oscilloscopes. Included with MSO models only. Includes cable, leads and grabber clips
$1,259
RSA5000-AMK
RSA5000-AMK
Advanced Measurement Kit Option for the RSA5000 Series Real Time Spectrum Analyzers. License code is emailed and user installed.
$599
RSA5000-BW40
RSA5000-BW40
40 MHz Real Time Bandwidth Option for the RSA5000 Series Real Time Spectrum Analyzers. RSA5000s come standard with 25 MHz Real Time Bandwidth. License code is emailed and user installed.
$1,499
RSA5000-PA
RSA5000-PA
PreAmplifier Option for the RSA5000 Series Real Time Spectrum Analyzers. License code is emailed and user installed.
$399
RX1000
RX1000
RF Demo Kit (Receiver)
$902
S1210 EMI Pre-compliance
S1210 EMI Pre-compliance
EMI PreCompliance Software for RIGOL Spectrum Analyzers. Requires EMI option to be enabled on the instrument.
$524
S1220
S1220
ASK/FSK Demodulation Software. Only for use with DSA832, DSA832E, or DSA875 instruments.
$419
SA-DS1000Z
SA-DS1000Z
Serial decoding and trigger option for DS1000Z Includes the following bus types RS232/UART, I2C, and SPI
$174
SD-CAN-DS6
SD-CAN-DS6
CAN BUS Serial Decode Option for the DS6000 Oscilloscope
$825
SD-FlexRay-DS6
SD-FlexRay-DS6
FLEXRAY BUS Serial Decode Option for the DS6000 Oscilloscope.
$2,253
SD-I2C/SPI-DS6
SD-I2C/SPI-DS6
I2C & SPI BUS Serial Decode Option for the DS6000 Oscilloscope. SPI Decode requires 4 channel oscilloscope
$825
SD-RS232-DS6
SD-RS232-DS6
RS232 & UART BUS Serial Decode Option for the DS6000 Oscilloscope
$825
SLEWRATE-DL3
SLEWRATE-DL3
High Slew Rate Option for DL3000 Series Loads. Standard on DL3000A series instruments.
$107
SSC-DSA
SSC-DSA
Real Time signal capture option for the spectrum analyzer. Enables 1.5 MHz of real time capture for signals like FSK. Works on the DSA700 series and the DSA815 or DSA815-TG.
$209
T2R1000
T2R1000
Active probe adaptor for connecting TekProbe-BNC probes to a DS6000 or MSO/DS4000
$314
TIMER-DP700
TIMER-DP700
Programmable Sweep Timer option for the DP700 Family
$62
TRIGGER-DP700
TRIGGER-DP700
External Trigger In and Internal Trigger out option for the DP700 power supplies
$62
TX1000
TX1000
RF Demonstration board with built in 1 GHz Oscillator, mixer, filters, and amplifier.
$945
Ultra Acquire Pro
Ultra Acquire Pro
M300 Configuration Software with advanced data analysis features
$919
Ultra Spectrum
Ultra Spectrum
Software for controlling and analyzing data from RIGOL spectrum analyzers.
$253
Ultra Station-adv
Ultra Station-adv
Full advanced version of UltraStation wave generation software for DG1000Z, DG4000, DG5000 Series generators as well as DS1000Z and DS2000A "-S" embedded generators. This is a software upgrade license.
$109
UltraView
UltraView
Datalogging software for the DM3058 or DM3058E. Requires purchase to use.
$132
UPA-DS
UPA-DS
Power Analysis Software for DS2, DS4, & MSO4 oscilloscopes.
$880
USB-GPIB
USB-GPIB
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.
$329
VB1032
VB1032
VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. Requires TG Option. Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: >= 25 dB
$692
VB1040
VB1040
800 MHz to 4 GHz VSWR Bridge with DSA8-VSWR software for DSA800 Spectrum Analyzers. *SW does NOT work with DSA1000 Family. Requires TG Option.
$879
VB1080
VB1080
VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. *SW does NOT work with DSA1000 Family. Requires TG Option.
$734
VSWR-DSA800
VSWR-DSA800
VSWR Measurement License Only (DSA800s with TG Only)
$505
data AcqUISITION